|
Remote Pickups: When a tractor and vac don't allow the user access to hard-to-reach areas, the Remote Pickup will get the job done. Twelve and fifteen foot hoses extend vacuuming capabilities around trees and under shrubs. Quick disconnect design allows operator to switch from vacuuming from the mower deck to vacuuming with the Remote Pickup without any tools and little effort.
Remote Pickups come in three models: The Model 150 - Comes with 4" diameter wand assembly and remote hose, 6" to 4" reducer and 6" quick connector (for 6" intake). The Model 160 - Comes with 6" diameter wand assembly and remote hose, 6" splice connector and 6" quick connector (for 6" intake). The Model 190 - Comes with 6" diameter wand assembly and remote hose, 8" to 6" reducer and 8" quick connector (for 8" intake). |
Product Summary |
|
Counterbalancing may be necessary with the Model 462-Z or 462-ZK applications, front weight bars are available.
The weight kits mount to the front of the ZTR, between the front casters, and stabilize the ZTR for pulling or hard acceleration. |
Palmor Products Inc. |
|
Specializing in lawn Vacuums and accessories for everyone’s needs! |
|
Remote Pickups |
|
462-Z Counter Weight Kits |
|
The 380-385 Tow Kit (Part No. 38025) offers the user the versatility of vacuuming in hard-to-reach areas independent of the mower. Allows for easy transportation to storage building also.
The kit consists of caster wheel assembly and tow handle. Simple design makes for simple operation. |
|
If your Trac Vac mounts to a 3-point configuration on the tractor and the mower lifts from the 3-point lower arms, a lift kit will be necessary. The lift kit effectively allows the mower adjustment to by-pass the lower arms.
A standard lift kit (Part No. 85040) is supplied with any Trac Vac 3-point mounting and works on most models, however on certain tractor applications a special lift kit is needed, check with your dealer or distributor to determine if you need a special lift kit. |
|
Weight kit Part No. 46275 for Ransomes Bobcat and Great Dane Chariot shown. *Click Picture to Enlarge*
|
|
*Click picture to Enlarge*
Chopper |
|
Model 380, 385, CV385 Tow Kit |
|
*Click picture to Enlarge*
Chopper |
|
3-Point Lift Kits |
|
On some PTO applications, it may be necessary to level the dump cart by lowering the mounting point of cart to vac frame. A simple drop hitch (Part No. 85111) can be used.
The PTO Drop Hitch drops the hitch point approximately 4" lower than the hitch point on the frame of the vacuum. |
|
*Click picture to Enlarge* Lift kit shown is Part No. 85055 for John Deere Models 670, 770, 870.
Chopper |
|
PTO Drop Hitch |
|
This site uses Adobe PDF files to view product Specifications. CLICK LINK ABOVE TO DOWNLOAD Adobe Reader
|
|
This site Maintained By:
Wednesday, April 20, 2006
|
|
Copyright © 2005 Palmor Products Inc. |